Key Plant 500 ton tank turning rolls

CR500: 500 Ton Turning Roll Set

The CR500 500 ton turning rolls deliver extreme-capacity rotation for the heaviest tanks, pressure vessels, heat exchangers, and industrial cylinders—making them ideal for heavy fabrication, refinery construction, offshore module assembly, and high-tonnage manufacturing. Built with a fully welded steel frame, the CR500 provides stable, controlled rotation under massive loading stress, helping fabricators weld efficiently and safely with confidence.

Each set features manually adjustable wheel brackets, enabling operators to quickly adapt roll spacing to suit different vessel diameters—while maintaining a constant centerline for accurate weld positioning and repeatable setup.

Designed to perform in challenging environments both in-shop and on-site, the CR500 uses a two-motor, two-wheel-drive system to synchronize movement, eliminate torque-tube alignment challenges, and reduce maintenance. Whether you’re rotating large diameter pressure vessels, wind tower sections, or refinery vessels, the CR500 delivers reliability and power for the biggest industrial welding applications.

Technical Summary

  • 500 ton set rotating capacity for large pressure vessels & industrial tanks
  • 49.2–295.3 in vessel diameter range using adjustable wheel brackets
  • Polyurethane wheels provide grip and load stability
  • Twin inverter-controlled AC drive motors for smooth, variable-speed rotation
  • Heavy-duty worm-and-wheel gearboxes delivering high torque at low RPM
  • Deep-groove roller bearings support extreme loading and maintain smooth motion
  • Pendant hand control with forward/reverse, speed control & emergency stop
  • IP65 control enclosure protects against dust & wash-down environments
  • UL-certified electrical system for safety and compliance
Additional Information

Key Plant’s CR500 Turning Rolls are engineered for long-term duty in high-load, high-value industrial environments. Every component—from polyurethane wheel sets to fully enclosed inverter drives—is selected to maximize uptime, protect your workforce, and deliver the most stable weld platform possible.

  • Advanced Drive System:
    Variable-frequency AC motors deliver smooth speed control and torque—engineered for the consistent rotation required in automated welding, multi-pass welds, and alignment control.
  • Heavy-Duty Gearboxes:
    Twin worm-and-wheel assemblies provide exceptional load tolerance, torque delivery, and maintenance intervals—ideal for extreme tonnage.
  • Industrial-Grade Bearings:
    High-capacity roller bearings distribute point loading efficiently while improving rotating stability.
  • Install Anywhere:
    The CR500 is designed for large fabrication bays, modular shop layouts, and field-build applications.
  • Certified Safe:
    UL508 electrics, UL2011 load certification, and IP65-rated control enclosures give operators complete confidence and compliance.

This combination of engineered strength, precise rotation, and certified safety standards makes the CR500 Turning Rolls a cornerstone solution for industrial-scale welding.

Product Resources

CR500 500 Ton Turning Roll Set Spec Sheet

Industries & Applications

Key Plant Turning Rolls are engineered to support a wide range of industries and applications that involve the rotation, alignment, and welding of cylindrical workpieces. Designed for maximum stability and adaptability, our turning rolls are a proven solution for rental or long-term fabrication projects across the USA.

Common Industries:

  • Oil & Gas – Pressure vessels, pipe spooling, pipeline welding
  • Petrochemical & Refining – Reactor and tower fabrication
  • Power Generation – Heat exchangers, condensers, and turbine shells
  • Renewable Energy – Wind tower sections and monopile welding
  • Shipbuilding & Offshore – Tanks, pressure cylinders, and structural components
  • Aerospace & Defense – High-precision cylindrical fabrication
  • Construction & Infrastructure – Structural steel fabrication and tank production
  • Manufacturing & OEMs – Rotational welding and assembly of cylindrical parts

Fabricators rely on the CR500 500 ton turning rolls for handling heavy pressure vessels, refinery towers, and offshore module components safely and efficiently.

Key Applications:

  • Welding and fabricating tanks, pressure vessels, and drums
  • Handling and rotating pipes, cylinders, and heat exchangers
  • Assisting in coating, painting, or inspection of round workpieces
  • Supporting cladding, overlay, or automated welding systems
  • Providing safe, stable rotation for heavy, offset-load components

Whether in a high-volume fabrication shop or on a job site with limited space, Key Plant Turning Rolls offer reliable performance, fast setup, and unmatched flexibility for rotating heavy, cylindrical components.

Specifications

ModelKP-CR500 Conventional Turning Roll Set (Drive & Idler)
Safe Working Load – Drive Unit250 ton (250,000 kg) maximum
Safe Working Load – Idler Unit250 ton (250,000 kg) maximum
Maximum Load Carrying Capacity – Set500 ton (500,000 kg) maximum
Rotation Capacity, Drive Unit750 ton (750,000 kg) maximum
Wheel Centre Distance55.1, 85, 131.5 in
Vessel Diameter Capacity49.2in to 295.3 in
Rotation Speed Range3.9 to 41.3 in/min
Tyre TypePolyurethane, 95A durometer shore rating
Wheel Size33.9 in diameter x 27 in wide
Overall Height to Top of Tyre53.8 in
Five Function Hand ControlPush Button Pendant, 50 ft control cable (forward/stop/reverse/speed control/emergency stop)
Rotation Drive Motor2 x 7.5kW with fan cooling
Primary Input Power380 to 480V, 3 Phase, 50/60Hz
Input Current at Rated Load29.9 A
Overall Length & Width – Drive Unit237.7 in x 63.1 in
Overall Length & Width – Idler Unit177.6 in x 57.2 in
Weight – Drive Unit30,865 lb
Weight – Idler Unit26,456 lb
Ingress ProtectionIP65 Control Box Rating
Electrical CertificationUL508 Certified Control Box
Loading CertificationUL2011 Certified Safe Working Load

Alternative Conventional Turning Roll Options

Not quite fitting your application requirements? Check out our other tank turning rolls available for purchase.

Explore the full Conventional Turning Rolls range here.

Let’s Get You Set Up

Need a reliable tank turning roll set—fast? Contact Key Plant USA today to discuss your project requirements. Conventional Turning Rolls are available for delivery across the United States.

📞 Call now +1 832 770 9173 or request a quote online — and take your welding productivity to the next level with automation solutions that work as hard as you do.